PRODUCTS AFFECTED: All Textron Aviation Inc. (Beechcraft) King Air 200 and 300 series aircraft equipped with G1000 Integrated Flight Deck per STC SA01535WI-D with the following system software versions are affected: software versions 0985.00 or later (legacy) software versions 2286.00 to 2286.06 (NXi) CERTIFICATION AUTHORIZATION: STC SA01535WI-D COMPLIANCE: Optional: This Service Bulletin may be incorporated … Continued

PRODUCTS AFFECTED: G500/G600 systems installed under the G500/G600 Part 23 AML STC SA02153LA-D are affected. CERTIFICATION AUTHORIZATION: STC SA02153LA-D COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This update includes: GDU 620 software version 7.36: ◦ Added GSU 75 configuration options for AHRS installation, … Continued

PRODUCTS AFFECTED: GTX 3X5R transponder installed in G1000-equipped PA 46-350P/500TP aircraft with GDU software versions between 14.XX and 15.XX are affected. CERTIFICATION AUTHORIZATION: STC SA01714WI COMPLIANCE: Mandatory: This STC Service Bulletin must be accomplished within the next 5 hours of operation. PURPOSE: GTX G1000 configuration loader images cause the aircraft cabin pressurization system to not … Continued

PRODUCTS AFFECTED: G5 Electronic Flight Instruments installed using FAA STC SA01818WI, EASA STC 10064473, and EASA STC 10060846 are affected. CERTIFICATION AUTHORIZATION: FAA STC SA01818WI, EASA STC 10064473, EASA STC 10060846 COMPLIANCE: Mandatory for G5 Electronic Flight Instruments installed in single engine Class 1 aircraft certified with FIKI or planning to install a G3X system … Continued

PRODUCTS AFFECTED: GPS 175/GNX 375 navigators installed under the GPS 175/GNX 375 Part 23 AML STC SA02636SE are affected. CERTIFICATION AUTHORIZATION: STC SA02636SE COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This STC Service Bulletin provides notification of the initial issuance of STC SA02636SE … Continued

PRODUCTS AFFECTED: GMA 342 (011-03520-10) and GMA 345 (011-03520-00) units with System Software Version 2.10 (or earlier) are affected. CERTIFICATION AUTHORIZATION: TSO Authorization COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: GMA 342/345 System Software Version 2.20 includes the following enhancements: Improves “passengers always get … Continued

REVISION B: Added EASA 10053621 PRODUCTS AFFECTED: GTN 6XX/7XX systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SR02120SE and EASA STC 10053621 are affected. CERTIFICATION AUTHORIZATION: AML STC SR02120SE and EASA STC 10053621 COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: … Continued

PRODUCTS AFFECTED: GTX 335/335R/345/345R (GTX 3X5(R)) units installed using Part 23 ADS-B AML STC SA01714WI are affected. CERTIFICATION AUTHORIZATION: STC SA01714WI COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: STC SA01714WI, Master Drawing List revision 12 includes: GTX 3X5(R) main software 2.52 ADS-B software … Continued

PRODUCTS AFFECTED: All GTS 8X0 (GTS 800/GTS 820/GTS 850) units with software version 4.12 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display system are affected by this bulletin. The current GTS 8X0 software version can be viewed by using … Continued

PRODUCTS AFFECTED: All GTS Processor GTS 825/GTS 855/GTS 8000 units (011-02571-0( )) with software version 3.12 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display systems are affected. The current GTS Processor software version can be viewed by using the … Continued

REVISION B: Added GSU 75/75B Reset Information PRODUCTS AFFECTED: G500/G600 TXi PFD/MFD/EIS display systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02571SE are affected. CERTIFICATION APPROVAL: STC SA02571SE COMPLIANCE: Recommended: GSU 75/75B AHRS Software Version 2.06 is recommended at the next scheduled maintenance interval. All other software versions are optional. PURPOSE: STC SA02571SE, … Continued

REVISION C: Added GSU 75/75B Reset Information PRODUCTS AFFECTED: G500/G600 systems installed using G500/G600 Part 23 AML STC SA02153LA-D are affected. CERTIFICATION APPROVAL: STC SA02153LA-D and EASA STC 10053008 COMPLIANCE: Recommended: GSU 75/75B AHRS Software Version 2.06 is recommended at the next scheduled maintenance interval. All other software versions are optional. PURPOSE: Part 23 AML … Continued

PRODUCTS AFFECTED: GTS 800, 825, and 855 Traffic Systems installed using Approved Model List (AML) Supplemental Type Certificates (STC) 10067437 (EASA) and SA02121SE (FAA) are affected. GTS 820 and 850 Traffic Systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02016SE-D are affected. CERTIFICATION APPROVAL: EASA STC 10067437 and FAA STC SA02121SE MDL … Continued

PRODUCTS AFFECTED: G500/G600 TXi PFD/MFD/EIS display systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02571SE are affected. CERTIFICATION APPROVAL: STC SA02571SE COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: STC SA02571SE, Master Drawing List revision 5 includes G500/G600 TXi Main Software … Continued

PRODUCTS AFFECTED: G500H TXi PFD/MFD display systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02622SE are affected. CERTIFICATION APPROVAL: AML STC SR02622SE COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This STC Service Bulletin provides notification of the initial STC approval … Continued

PRODUCTS AFFECTED: GFC 500 systems installed under GFC 500 Part 23 AML STC SA01866WI are affected. CERTIFICATION AUTHORIZATION: AML STC SA01866WI COMPLIANCE: Mandatory: This STC Service Bulletin is mandatory for GFC 500 systems installed per Part 23 AML STC SA01866WI. PURPOSE: G5 Software Version 5.70 (including GMC 507 Software Version 2.60) updates the internal pre-flight … Continued

PRODUCTS AFFECTED: G5000 systems with System Software Version 2091.03 and GIA 64E hardware installed in Textron Aviation Model 400A (Beechjet) aircraft using STC ST01821WI are affected. CERTIFICATION AUTHORIZATION: STC ST01821WI COMPLIANCE: Recommended for G5000-equipped Textron Aviation Model 400A with G5000 System Software Version 2091.03 and GIA 64E hardware. PURPOSE: G5000 System Software Version 2091.04 (including … Continued

PRODUCTS AFFECTED: All aircraft with the GFC 600 autopilot installed per STC SA01844WI using Master Drawing List (MDL) 005-01009-01 Revisions 1 through 6 are affected. CERTIFICATION APPROVAL: STC SA01844WI COMPLIANCE: Recommended: Compliance with this service bulletin is recommended at the next opportunity, not to exceed next annual maintenance check. PURPOSE: Increase the torque on the … Continued

PRODUCTS AFFECTED: Piper PA-28 aircraft with GFC 500 systems installed per the GFC 500 Part 23 AML STC SA01866WI are affected. CERTIFICATION AUTHORIZATION: AML STC SA01866WI MDL Revision 8 COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This STC Service Bulletin provides instructions for … Continued

PRODUCTS AFFECTED: GTN 6XX/7XX systems installed using FAA STC SA02019SE-D and EASA STC 10037574 are affected. CERTIFICATION APPROVAL: FAA STC SA02019SE-D and EASA STC 10037574 COMPLIANCE: Mandatory: The Service Bulletin is mandatory for GTN 6XX/7XX units with software versions 6.00 through 6.50, interfaced to a GDL 88 or GTX 345 and is warranty reimbursable. For … Continued

REVISION B: Added EASA STC 10037574 PRODUCTS AFFECTED: GTN 6XX/7XX navigators and Flight Stream 210/510 installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02019SE-D are affected. CERTIFICATION APPROVAL: STC SA02019SE-D and EASA STC 10037574 MDL Revision 19 (or later FAA-approved version) COMPLIANCE: Optional PURPOSE: AML STC SA02019SE-D and EASA STC 10037574 Master Drawing … Continued

REVISION B: Added EASA STC 10064794 PRODUCTS AFFECTED: G500/G600 TXi PFD/MFD/EIS display systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02571SE and EASA STC 10064794. CERTIFICATION APPROVAL: STC SA02571SE MDL Revision 4 and EASA STC 10064794 Revision 2 COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and … Continued

PRODUCTS AFFECTED: The GPS 150XL is affected. DISCUSSION: Effective 12/31/18, ALL repair services and service parts for the GPS 150XL will be discontinued.  As a reminder GPS 150XL display repair services have been discontinued since 9/1/15.  Additionally (and effective immediately) NOH GPS 150XLs are also discontinued. We sincerely regret discontinuing service or support on any … Continued

PRODUCTS AFFECTED: GDL 69 SXM (Garmin P/N 011-03177-00), GDL 69A SXM (Garmin P/N 011-03177-10), GDL 69H SXM (Garmin P/N 011-03177-20), and GDL 69AH SXM (Garmin P/N 011-03177-30) units with software version 5.10 or earlier that are not installed as part of a GX000 Integrated Flight Deck System. COMPLIANCE: Optional: This Service Bulletin may be incorporated … Continued

PRODUCTS AFFECTED: All aircraft with the GFC 500 autopilot installed per STC SA01866WI using Master Drawing List (MDL) 005-01264-00 Revisions 1 through 7. CERTIFICATION APPROVAL: STC SA01866WI (see Service Bulletin 1864 for details) COMPLIANCE: Compliance with this Service Bulletin is recommended at the next opportunity, not to exceed next annual maintenance check. PURPOSE: Increase the … Continued

PRODUCTS AFFECTED: GFC 600 systems installed under the GFC 600 Part 23 AML STC SA01844WI are affected. CERTIFICATION APPROVAL: STC SA01844WI COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: GMC 605 software version 2.21 includes support for Descent Vertical Navigation (VNAV). NOTE GMC 605 software … Continued

PRODUCTS AFFECTED: All GTS 8X0 (GTS 800/GTS 820/GTS 850) units with software version 4.10 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display system are affected by this bulletin. The current GTS 8X0 software version can be viewed by using … Continued

PRODUCTS AFFECTED: G500/G600 TXi PFD/MFD/EIS display systems installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02571SE. CERTIFICATION APPROVAL: STC SA02571SE MDL Revision 4 COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This STC Service Bulletin provides notification of an update to the … Continued

PRODUCTS AFFECTED: All G500(H) TXi, G600 TXi, and G700 TXi units are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional. PURPOSE: G500(H)/G600/G700 TXi Main Software Version 2.20 contains the following changes: Added Vertical Navigation (VNAV) functionality NOTE GTN 6XX/7XX with software version 6.50 or later is also required. Added interface to GFC 500 autopilot Added CDI … Continued

PRODUCTS AFFECTED: GWX 68 units with software version 2.12 (or earlier) and interfaced to a G500/G600, G500 TXi/G600 TXi, GTN 7XX, GMX 200, or other 3rd party flight display systems are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: GWX … Continued

REVISION B: Clarified Purpose Section PRODUCTS AFFECTED: All GWX 70 Weather Radar systems with software version 2.20 (or earlier) and interfaced to a G500/G600, G500 TXi/G600 TXi, GTN 7XX, GMX 200, or other 3rd party flight display systems are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s … Continued

PRODUCTS AFFECTED: All G1000/G1000 NXi equipped King Air 200 series aircraft that were modified in accordance with MDL 005-00421-00 Rev. 26 and earlier are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Recommended: Garmin recommends the incorporation of this STC Service Bulletin at the next scheduled service interval. PURPOSE: The GTX transponder could go into standby mode … Continued

PRODUCTS AFFECTED: All G1000 NXi equipped King Air 200 and 300 series aircraft equipped with G1000 NXi System Software versions 2286.01, 2286.02, 2286.03, 2286.04 and 2286.05 are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: STC SA01535WI-D, 200 series … Continued

PRODUCTS AFFECTED: G500/G600 systems installed under the G500/G600 Part 23 AML STC SA02153LA-D that are interfaced to a GFC 600 and dual Garmin GNS/GTN Navigators are affected. CERTIFICATION APPROVAL: STC SA02153LA-D COMPLIANCE: Mandatory: This STC Service Bulletin is mandatory for products listed in the Products Affected section. PURPOSE: STC SA02153LA-D Master Drawing List G600 PFD/MFD … Continued

PRODUCTS AFFECTED: Textron Aviation (Beechcraft) 36, A36, and A36TC aircraft with GFC 600 systems installed per GFC 600 Part 23 AML STC SA01844WI are affected. CERTIFICATION APPROVAL: STC SA01844WI COMPLIANCE: Mandatory for GFC 600 systems installed per GFC 600 Part 23 AML STC SA01844WI, Master Drawing List 005-01009-01, Revision 1 or 2. PURPOSE: Notification of … Continued

PRODUCTS AFFECTED: GFC 600 systems installed under the GFC 600 Part 23 AML STC SA01844WI are affected. CERTIFICATION APPROVAL: STC SA01844WI COMPLIANCE: Mandatory for GFC 600 systems installed under STC SA01844WI that interface to a GDU 620 and dual GTN/GNS products. Mandatory for GFC 600 systems installed under STC SA01844WI in Textron Aviation 36/A36/A36TC aircraft. … Continued

PRODUCTS AFFECTED: G500/G600 TXi systems installed under the G500/G600 TXi AML STC SA02571SE that are equipped with a Garmin GFC 600 Autopilot and dual GTN/GNS products are affected. CERTIFICATION APPROVAL: STC SA02571SE COMPLIANCE: Mandatory: This STC Service Bulletin is mandatory for products listed in the Products Affected section. PURPOSE: STC SA02571SE, Master Drawing List revision … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 3000 units with software version 3.30 or previous software versions installed with a Honeywell TPA-81A or TPU-67A TCAS II unit and not installed in a Garmin Integrated Flight Deck system (G5000, G3000, G2000, G1000, G1000H, G950, G900X, Cirrus Perspective™, and Embraer Prodigy® Integrated Flight Deck Systems). The … Continued

PRODUCTS AFFECTED: G500/G600 TXi system are affected. CERTIFICATION APPROVAL: EASA STC 10064794 (FAA STC SA02571SE) COMPLIANCE: Optional PURPOSE: This STC Service Bulletin provides notification of the initial issuance of EASA STC 10064794 Master Drawing List revision 1. This STC approves the installation of the G500/G600 TXi system into an Approved Model List (AML) of Part … Continued

PRODUCTS AFFECTED: GAD 43e units – part number 011-02349-0() – with software version 2.31 (or earlier) are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: This Service Bulletin incorporates new unit software version 2.32 for GAD 43e units. Software version … Continued

PRODUCTS AFFECTED: GTX 335/335R/345/345R (GTX 3X5(R)) and GTX 33/33D/330/33D (GTX 33X) units installed using Part 23 ADS-B AML STC SA01714WI are affected. CERTIFICATION APPROVAL: STC SA01714WI MDL Revision 10 COMPLIANCE: Optional PURPOSE: AML STC SA01714WI Master Drawing List (MDL) 005-00734-04, Rev. 10 includes: Improved Air/Ground Logic for both GTX 3X5(R) and GTX 33/330 Approval of … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 23, GTX 328, GTX 33(D)(ES)(H), & GTX 330(D)(ES) units with software version 8.03 or previous software versions that are not installed in a Garmin Integrated Flight Deck system (G1000, G1000H, G950, G900X, Cirrus Perspective®, and Embraer Prodigy® Integrated Flight Deck Systems). The GTX 328/GTX 330(D)(ES) current software … Continued

PRODUCTS AFFECTED: STC SA02573SE authorizes the installation of the following on Mooney M20( ) Series aircraft listed on the TCDS 2A3: GDL 82 GDL 82 with GPS/WAAS CERTIFICATION APPROVAL: STC SA02573SE COMPLIANCE: Optional PURPOSE: This STC Service Bulletin provides notification of initial issuance of STC SA02573SE, with GDL 82 Mooney M20( ) Series STC Master … Continued

PRODUCTS AFFECTED: GNS 400W/500W Series navigators and Flight Stream 210 units installed using the Approved Model List (AML) Supplemental Type Certificate SA01933LA-D are affected. CERTIFICATION APPROVAL: STC SA01933LA-D Master Drawing List Rev. L COMPLIANCE: Optional PURPOSE: GNS 400W/500W Series Main Software v5.40 includes the following: Added support for GFC 500 Added ARINC 429 input for … Continued

PRODUCTS AFFECTED: GTN 6XX/7XX navigators and Flight Stream 210/510 installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02019SE-D are affected. CERTIFICATION APPROVAL: STC SA02019SE-D MDL Revision 17 REVISION B: Clarified Approved Flight Stream Software Versions COMPLIANCE: Optional PURPOSE: AML STC SA02019SE-D Master Drawing List (MDL Revision 17) includes: GTN 6XX/7XX Software v6.41 GTN … Continued

PRODUCTS AFFECTED: All GTS Processor (GTS 825/GTS 855/GTS 8000) units with software version 3.05 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display systems are affected by this bulletin. The current GTS Processor software version can be viewed by using … Continued

PRODUCTS AFFECTED: All GDL 84/88 units are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Mandatory for all GDL 88D (diversity) units with Software Version 3.34 only. Optional for all other units. WARRANTY INFORMATION: This modification is warranty reimbursable for GDL 88D (diversity) units with Software Version 3.34 (with a deadline of November 16, 2018). This modification … Continued

PRODUCTS AFFECTED: Garmin Flight Stream 510 (011-03595-( )) units with software version 2.10 or earlier are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional PURPOSE: Flight Stream 510 Software Version 2.30 improves Bluetooth functionality. 1742B_ASDN

PRODUCTS AFFECTED: All G1000 NXi equipped King Air 200 and 300 series aircraft equipped with G1000 NXi System Software versions 2286.01, 2286.02, 2286.03, and 2286.04 that include a GTX 345R transponder not interfaced to a traffic system are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: G1000 NXi System Software version 2286.05 corrects an issue … Continued

PRODUCTS AFFECTED: The units listed below with display software version 2.12 or earlier are affected by this bulletin. GTR 225 (011-02718-00) GTR 225A (011-02807-00) GTR 225B (011-02808-00 or 011-02808-20) GNC 255A (011-02806-00) GNC 255B (011-02719-00 or 011-02719-20) CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional PURPOSE: Display Software Version 2.20, COM Software Version 2.30, and NAV Software … Continued

PRODUCTS AFFECTED: Garmin Flight Stream 110 (011-03257-00) and Flight Stream 210 (011-03257-40) units with software version 2.50 or earlier are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional. PURPOSE: Flight Stream 110/210 Software Version 2.70 contains the following changes: Fixed issue with volume setting for GDL 69 SXM installations Added support for using internal AHRS data … Continued

PRODUCTS AFFECTED: GTN 6XX/7XX navigators, GMA 35/35c audio panels, and Flight Stream 210/510 installed using Approved Model List (AML) Supplemental Type Certificate (STC) SA02019SE-D are affected. CERTIFICATION APPROVAL: STC SA02019SE-D MDL Revision 16 COMPLIANCE: Optional PURPOSE: AML STC SA02019SE-D Master Drawing List (MDL) (005-00533-C0, Rev. 16) includes: software updates for the GTN 6XX/7XX software updates … Continued

PRODUCTS AFFECTED: All GTX 3X5(R) series products with main software version 2.11 or earlier are affected. CERTIFICATION APPROVAL: TSO COMPLIANCE: Optional PURPOSE: GTX 3X5(R) Series main software version 2.12 includes the following changes: Fixed an A429 startup issue for G9XX/G1XXX retrofit installations Fixed air/ground determination issue Added ability to enter aircraft stall speed Added GNS … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 327 units with Software Version 2.12 or previous software versions that use a Gillham based altitude encoder, and are not installed in a Garmin Integrated Flight Deck system (G1000, G1000H, G950, G900X, G500, G500H, G600, Cirrus Perspective™, and Embraer Prodigy® Integrated Flight Deck Systems). The GTX 327 … Continued

PRODUCTS AFFECTED: All G5000-equipped Beechcraft Model 400A aircraft with System Software Version 2091.02 AND GEA 7100 Software Version 2.30 are affected. Do the following to identify the current G5000 system software version and GEA 7100 software version. Energize the MFD in normal mode. Look at the upper right-hand corner of the MFD power-up screen under … Continued

PRODUCTS AFFECTED: G500/G600 systems installed under the G500/G600 Part 23 AML STC SA02153LA-D are affected. CERTIFICATION APPROVAL: AML STC SA02153LA-D COMPLIANCE: Optional PURPOSE: STC SA02153LA-D Master Drawing List G600 PFD/MFD System AML STC 005-C0313-00 Rev. S and Master Drawing List G500 PFD/MFD System AML STC 005-C0313-10 Rev. 5 include the following: GDU 620 software version … Continued

PRODUCTS AFFECTED: This STC update adds interfaces for the GDL 88H and GTX 3X5 to the Garmin navigators listed below, installed in approved Bell 206 and 407 helicopters. GPS 400W GNC 420W GNC 420AW GNS 430W GNS 430AW GPS 500W GNS 530W GNS 530AW CERTIFICATION APPROVAL: STC SR02080SE MDL Revision 5 COMPLIANCE: Optional PURPOSE: STC … Continued

REVISION B: EASA Approval PRODUCTS AFFECTED: G500/G600 systems installed under the G500/G600 Part 23 AML STC SA02153LA-D or EASA STC 10053008 are affected. CERTIFICATION APPROVAL: AML STC SA02153LA-D and EASA STC 10053008 COMPLIANCE: Optional PURPOSE: STC SA02153LA-D Master Drawing List G600 PFD/MFD System AML STC Rev. R and Master Drawing List G500 PFD/MFD System AML … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 3000 units with software version 3.20 or previous software versions not installed in a Garmin Integrated Flight Deck system (G5000, G3000, G2000, G1000, G1000H, G950, G900X, Cirrus Perspective™, and Embraer Prodigy® Integrated Flight Deck Systems). The GTX 3000 current software version can be retrieved using the GTX install … Continued

PRODUCTS AFFECTED: All G1000 NXi equipped King Air 200 and 300 series aircraft equipped with G1000 NXi System Software version 2286.02 (and a Flight Stream 510 installed in the MFD) are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: G1000 NXi System Software version 2286.03 corrects an issue in version 2286.02 that may prevent the Flight Stream 510 from … Continued

PRODUCTS AFFECTED: All GTS Processor (GTS 825/GTS 855/GTS 8000) units with software version 3.04 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display systems are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional – Service Bulletin 1719 may be incorporated at the owner’s discretion … Continued

PRODUCTS AFFECTED: GMA 342 (011-03520-10) and GMA 345 (011-03520-00) units with Software Version 2.00 (or earlier) are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional: This Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable. PURPOSE: Software Version 2.10 fixes a problem during power-up that results in high music volume for the pilot, copilot, and … Continued

PRODUCTS AFFECTED: All G1000 NXi equipped King Air 300 series aircraft equipped with G1000 NXi System Software Version 2286.02 or later are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: A 14 CFR Part 91.227 ADS-B Out compliant option is now available. Download 1713A_ASDN

PRODUCTS AFFECTED: All G1000 NXi equipped King Air 200 and 300 series aircraft equipped with G1000 NXi System Software Version 2286.01 are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: For 300 Series Aircraft: G1000 System Software Version 2286.02 adds GTX 3000 support for Rockwell Collins TTR 920/4000 Traffic Systems. The GTX 3000 transponder replaces the TDR-94 transponder and … Continued

PRODUCTS AFFECTED:    Beechcraft Corporation Model 400A Beechjet aircraft modified with the Garmin G5000 Integrated Flight Deck (STC ST01821WI Master Drawing List, Revisions 1 through 6) before the publication date of this service bulletin are affected. CERTIFICATION APPROVAL:    STC ST01821WI COMPLIANCE:    MANDATORY – Compliance with this Service Bulletin is mandatory at next opportunity, not to exceed … Continued

PRODUCTS AFFECTED:    G1000-equipped Hawker Beechcraft King Air C90/C90GT/C90GTi series aircraft are affected. CERTIFICATION APPROVAL:    STC SA01535WI-D COMPLIANCE:    Optional PURPOSE:    A wiring change to provide uninterrupted crew boom audio and O2 mask microphone audio to the CVR. Download 1630A_ASDN

PRODUCTS AFFECTED:    All G1000-equipped Beechcraft King Air C90A/C90GT/C90GTi aircraft equipped with the following G1000 System Software Versions are affected: 0636.01 0636.02 0636.03 0636.05 0636.06 CERTIFICATION APPROVAL:    STC SA01456WI-D COMPLIANCE:    Optional PURPOSE:    G1000 System Software Version 0636.07 contains the following changes: Transponder (E)TSO C112d for European Mode S and ADS-B requirements Allow auto-nominated VNAV altitude constraints … Continued

PRODUCTS AFFECTED:    All GTX 3X5(R) series products (with main software version 2.09 or earlier and/or ADS-B software version 2.05 or earlier) that are interfaced to a TAS/TCAS are affected. CERTIFICATION APPROVAL:    TSO COMPLIANCE:    Optional PURPOSE:    GTX 3X5(R) Series main software version 2.10 includes the following changes: Added Enhanced Surveillance capability for European customers Fixed Altitude … Continued

PRODUCTS AFFECTED:    All G1000-equipped King Air 200 and 300 series aircraft equipped with G1000 System Software Versions 0985.01, 0985.02, 0985.03, 0985.04, 0985.05, 0985.06, 0985.07, 0985.08, or 0985.09 are affected. CERTIFICATION APPROVAL:    STC SA01535WI-D COMPLIANCE:    Optional PURPOSE:    New hardware: Flight Stream 510 for data streaming and database updates GDU 1050A/1550 NXi display hardware GCU 477 NXi … Continued

PRODUCTS AFFECTED: All GTS 8X0 (GTS 800/GTS 820/GTS 850) units with software version 3.10 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display system are affected. The current GTS 8X0 software version can be viewed by using the GTS 8X0 Install Tool, … Continued

PRODUCTS AFFECTED: G500H systems installed in Robinson R44 series rotorcraft (under STC SR02206SE) and Bell 206/407 series rotorcraft (under STC SR02295LA) are affected. CERTIFICATION APPROVAL: AML STC SR02295LA MDL Revision 7 COMPLIANCE: Optional PURPOSE: Data from STC SR02206SE (installation of G500H in Robinson R44 series rotorcraft) has been added to STC SR02295LA (installation of G500H in Bell 206/407 series … Continued

PRODUCTS AFFECTED: All GTS Processor (GTS 825/GTS 855/GTS 8000) units with software version 3.03 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display systems are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional – Service Bulletin 1701 may be incorporated at the owner’s discretion … Continued

PRODUCTS AFFECTED: G5000-equipped Beechcraft Model 400A aircraft with System Software Version 2091.00 or 2091.01 are affected. CERTIFICATION APPROVAL: STC ST01821WI MDL Revision 6 COMPLIANCE: Mandatory PURPOSE: G5000 System Software Version 2091.02 corrects a condition that can result in nuisance autopilot disconnects. Download 1705A_ASDN

PRODUCTS AFFECTED: All G1000-equipped Beechcraft King Air 200 and 300 series aircraft with G1000 System Software Versions 0985.07 or 0985.08 and a Garmin GTS 8000 (TCAS II) are affected. CERTIFICATION APPROVAL: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: G1000 System Software Version 0985.09 contains GTS 8000 Software Version 2.22. GTS 8000 Software Version 2.22 improves TCAS II resolution advisory audio message … Continued

PRODUCTS AFFECTED: Garmin navigators listed below with software version 5.20 (or previous) installed in approved Bell 206 and 407 helicopters are affected: GPS 500W GNS 530W GNS 530AW GPS 400W GNC 420W GNC 420AW GNS 430W GNS 430AW CERTIFICATION AUTHORIZATION: STC SR02080SE MDL Revision 3 COMPLIANCE: Optional PURPOSE: STC SR02080SE, 400W/500W Series Installation in Bell 206 and 407 STC … Continued

PRODUCTS AFFECTED: GTX 335/335R/345/345R (GTX 3X5(R)) and GTX 33/33D/330/330D (GTX 33X) units installed using Part 23 ADS-B AML STC SA01714WI are affected. CERTIFICATION AUTHORIZATION: STC SA01714WI MDL Revision 9 COMPLIANCE: Optional PURPOSE: Major details of STC SA01714WI, GTX 33X and GTX 3X5(R) with ADS-B AML STC MDL Revision 9 are: Software fix for GTX 3X5 resetting at heading 360 … Continued

PRODUCTS AFFECTED: GDL 84/88 units installed under the GDL 84/88 Part 23 AML STC SA02119SE are affected. CERTIFICATION AUTHORIZATION: STC SA02119SE MDL Revision 11 COMPLIANCE: Optional PURPOSE: STC SA02119SE MDL Revision 11 includes GDL 84/88 software version 3.34.  Software version 3.34 contains the following changes from version 3.33: METARs with missing cloud data will show on the interfaced display … Continued

PRODUCTS AFFECTED: Garmin Flight Stream 510 (011-03595-00) units are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional PURPOSE: Flight Stream 510 Software Version 2.10 adds: support for the GTN 6XX/7XX ability for crew and passengers to send and receive text messages and place phone calls with the Garmin Pilot app Download 1654A_ASDN

PRODUCTS AFFECTED: All GTX 3X5(R) series products – interfaced to a 3rd-party transponder controller, interfaced to an external AHRS, or installed in rotorcraft – are affected. CERTIFICATION AUTHORIZATION: TSO COMPLIANCE: Optional PURPOSE: GTX 3X5(R) Series main software version 2.05 includes the following changes: Fixed issues with GPS altitude used for rotorcraft air/ground logic Field enabled feature for 3rd party … Continued

PRODUCTS AFFECTED: The following units are affected: GTN625, GTN635, GTN650, GTN725, GTN750, GMA35, and GMA35c CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional PURPOSE: GTN 6XX/7XX Main Software Version 6.21, Touch Software Version 2.10, and WAAS Software Version 5.2 contain the following changes from Main Software Version 6.11, Touch Software Version 2.0, and WAAS Software Version 5.0: Changed to a new … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 3000 units with software version 3.10 or previous software versions not installed in a Garmin Integrated Flight Deck system (G5000, G3000, G2000, G1000, G1000H, G950, G900X, Cirrus Perspective™, and Embraer Prodigy® Integrated Flight Deck Systems). CERTIFICATION AUTHORIZATION: TSO Authorization COMPLIANCE: Optional – TSO Service Bulletin 1642 may be incorporated at … Continued

PRODUCTS AFFECTED: Garmin Flight Stream 210 (011-03257-40) units installed with a GSR 56 and GTN 6XX/7XX (with GTN software version 6.20 and later) are affected. CERTIFICATION APPROVAL: TSO Authorization COMPLIANCE: Optional PURPOSE: Flight Stream 210 Software Version 2.50 adds the ability for crew and passengers to send and receive text messages and place phone calls with the Garmin Pilot … Continued

PRODUCTS AFFECTED: GDL 84/88 units installed under the GDL 84/88 Part 23 AML STC SA02119SE are eligible for this software update. CERTIFICATION AUTHORIZATION: STC SA02119SE COMPLIANCE: Optional – STC Service Bulletin 1636 may be incorporated at the owner’s discretion. PURPOSE: This Service Bulletin provides notification of an update to the AML STC MDL for GDL 84/88 system software version … Continued

PRODUCTS AFFECTED: GTX 345R transponders installed in G950 equipped (Cutter) PA-46 and G1000 equipped PA-46-350P, PA-46R-350T (Phase I and II) aircraft with GDU software versions ranging between 12.XX and 14.XX are affected. CERTIFICATION AUTHORIZATION: STC SA01714WI COMPLIANCE: Mandatory: STC Service Bulletin 1641 must be accomplished within the next 5 hours of operation. PURPOSE: The GTX 345R transponder installation uses … Continued

PRODUCTS AFFECTED: All GDL84/GDL88 units interfaced to a GTN 6XX/7XX, GNS 4XXW/5XXW, GNS 480, GMX 200/MX20, G500, G600, or other 3rd party flight display system are affected.  GDL 88 units interfaced to a G1000 with GDU software versions 14.XX and earlier are also affected. CERTIFICATION AUTHORIZATION: TSO Authorization COMPLIANCE: Optional PURPOSE: GDL 84/88 System Software Version 3.33 contains the … Continued

PRODUCTS AFFECTED: All GTS Processor (GTS 825/GTS 855/GTS 8000) units with software version 3.01 (or earlier) and interfaced to a GTN 6XX/7XX, GNS 4XX(W)/5XX(W), GNS 480, G500, G500H, G600, GMX 200, MX20, or other 3rd party flight display systems are affected by this bulletin.  All GTS Processor (GTS 825/GTS 855/GTS 8000) units with software version 3.01 … Continued

CERTIFICATION AUTHORIZATION: AML STC SA02019SE-D or EASA STC 10037574 COMPLIANCE: Optional PURPOSE: This STC amendment updates the GTN software version to 6.11 and GMA 35 software version to v4.10A.  GTN Software Version 6.11 includes the following functions: User Defined Holds – Holds can be created by the pilot over an existing fix in the navigation database or over … Continued

CERTIFICATION AUTHORIZATION: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: A wiring change to provide uninterrupted crew boom audio and O2 mask microphone audio to the CVR. PRODUCTS AFFECTED: G1000-equipped Hawker Beechcraft King Air 200 series aircraft are affected. Download 1615A_ASDN

CERTIFICATION AUTHORIZATION: STC SA01535WI-D COMPLIANCE: Optional PURPOSE: G1000 System Software Version 0985.08 contains the following changes: Transponder (E)TSO C112d for European Mode S and ADS-B requirements Compatibility with the new Sirius XM service Allow auto-nominated VNAV altitude constraints Improve attitude and heading availability in certain northern latitudes. See Note below. Adds new GDL 69A SiriusXM unit to support … Continued

CERTIFICATION AUTHORIZATION: Part 27 AML STC SR02120SE COMPLIANCE: Optional PURPOSE: This STC amendment updates the GTN software from version 4.00 to version 6.11 and GMA 35 from v3.05 to v4.10A.  GTN Software Version 6.11 includes the following functions: User Defined Holds – Holds can be created by the pilot over an existing fix in the navigation database or … Continued

CERTIFICATION AUTHORIZATION: STC SA01933LA-D COMPLIANCE: Optional PURPOSE: GNS 400W/500W Series main software version 5.30 includes the following changes: Added support for using the GDL 88 heading input as a source of system heading. Corrected an issue, when configured with a GDL 88 with TCAS and no heading source, with ADS OFF and TCAS ON, the traffic page would … Continued

CERTIFICATION AUTHORIZATION: STC SA02019SE-D COMPLIANCE: Optional PURPOSE: GTN Software Version 6.11 includes the following functions: User Defined Holds – Holds can be created by the pilot over an existing fix in the navigation database or over a user defined waypoint. Search and Rescue Patterns Animation of precipitation on weather pages for FIS-B, Sirius XM, and Connext weather Metric … Continued

CERTIFICATION AUTHORIZATION: TSO Authorization COMPLIANCE: Optional PURPOSE:   GTN 6XX/7XX Main Software Version 6.11 contains the following changes from Version 5.13: Added support for custom holding patterns. Holds can be created over an existing fix in the navigation databases (or over a user-defined waypoint) and inserted into a flight plan or with direct-to navigation. Added Search and Rescue … Continued

CERTIFICATION APPROVAL: STC SR02295LA COMPLIANCE: Optional PRODUCTS AFFECTED: G500H systems installed in Bell 206/407 aircraft under STC SR02295LA with GDU Software Version 5.01 or earlier (STC SR02295LA-R Master Drawing List Rev 5 or earlier) are affected. PURPOSE: GDU 620 software updated from v5.01 to v7.01. This updated software includes the following: Enhanced MFD graphics and terrain resolution New MFD … Continued

PRODUCTS AFFECTED: GDL 69 SXM (Garmin P/N 011-03177-00), GDL 69A SXM (Garmin P/N 011-03177-10), GDL 69H SXM (Garmin P/N 011-03177-20), and GDL 69AH SXM (Garmin P/N 011-03177-30) units with software version 5.01 that are not installed as part of a GX000 Integrated Flight Deck System. PURPOSE: This Service Bulletin incorporates new unit Software Version 5.10 for GDL … Continued

PRODUCTS AFFECTED: This bulletin is applicable to GTX 23, GTX 33(D)(ES)(H), & GTX 330(D)(ES) units with software version 7.04 or previous software versions that are not installed in a Garmin Integrated Flight Deck system (G1000, G1000H, G950, G900X, Cirrus Perspective™, and Embraer Prodigy® Integrated Flight Deck Systems). PURPOSE: This Service Bulletin incorporates new unit software version 8.02 … Continued

PRODUCTS AFFECTED: All GTN 650 and GTN 750 navigators marked as Mod Level 4 or previous mod level are affected. PURPOSE: An issue has been identified where the VOR/LOC/GS may stop functioning in the affected units.  This will be indicated by a message on the GTN and the Nav frequencies will be replaced by a red X. … Continued

CERTIFICATION APPROVAL: TSO Approval COMPLIANCE: Optional SYSTEM: All GDL 84 and GDL 88(D)(H) products are affected. PURPOSE: GDL 84/88 System Software Version 3.32 contains the following changes from Version 3.20: GDL 90 Emulation/Legacy ADS-B Interface support (GDL 88 only) Removed ground traffic from ARINC 429 Traffic Out interface (GDL 88 only) Various processing efficiency improvements and minor bug fixes … Continued

CERTIFICATION APPROVAL: STC SA02119SE COMPLIANCE: Optional SYSTEM: GDL 84/88 units installed under the GDL 84/88 Part 23 AML STC SA02119SE are eligible for this software update. PURPOSE: GDL 84/88 System Software Version 3.32 contains the following changes from Version 3.20: GDL 90 Emulation/Legacy ADS-B Interface support (GDL 88 only) Removed ground traffic from ARINC 429 Traffic Out interface (GDL … Continued

  CERTIFICATION APPROVAL: STC SA02153LA-D COMPLIANCE: Mandatory: For all aircraft that have a G500/G600 Integrated Flight Deck System interfaced to a KFC 275 or KFC 325 autopilot system that includes altitude capture (ALTC) mode and vertical speed (VS) control from the G500/G600 Primary Flight Display (PFD). Optional: For all other aircraft, this STC Service Bulletin may be incorporated … Continued