Skip navigation links
Unsupported Browser Detected – For best results, please update your browser.

Aviation Alerts and Advisories

Service Advisory 1529: Procedure Legs in Terminal Procedures

AFFECTED PRODUCTS:
 G900X, G950, G1000(H), Cirrus Perspective, and Embraer Prodigy products with GDU software version 12.20 and later, and all G2000, G3000, G5000(H), and Embraer Prodigy Touch products are affected.

ISSUE:
 Some procedure legs in terminal procedures may be calculated and depicted incorrectly, if either a manually-sequenced leg type (identified by "MANSEQ") in the flight plan, or a leg identified with an altitude value in the flight plan is activated manually.

NOTE

MANSEQ and altitude procedure leg types work as intended within any flight plan as long as they are not manually activated.

NOTE

Altitude leg formats may differ depending on airframe configuration (e.g. ####FT or (####)).

When this condition occurs, the FMS will provide lateral guidance along an incorrectly calculated procedure leg (see attached Service Advisory).

PILOT ACTION:
 Do not manually activate any procedure legs identified by either an altitude or the abbreviation "MANSEQ." If the condition occurs, remove and replace the affected procedure.

Download 1529A