PRODUCTS AFFECTED:
GTN 6XX/7XX and GTN Xi systems installed under the GTN 6XX/7XX Part 23 AML FAA STC SA02019SE-D and EASA STC 10037574 are affected.
CERTIFICATION AUTHORIZATION:
FAA STC SA02019SE-D
COMPLIANCE:
Optional: This STC Service Bulletin may be incorporated at the owner’s discretion and is not warranty reimbursable.
PURPOSE:
This STC Service Bulletin provides notification of the FAA STC SA02019SE-D and EASA STC 10037574 Master Drawing List GTN 6XX/ 7XX Part 23 AML STC, Rev. 28 for the following:
- GTN Xi Main Software Version 20.10
- Added Glide Range Ring display on map page
- Added Remote Radio control, which allows a GTN Xi to control COM and NAV radios on another GTN Xi
- Added page navigation via the control knob, which allows the pilot to navigate to 9 different selectable pages via the knob
NOTE
Knobs can also be used for scrolling pages or zooming on maps.
-
- Added pilot selectable startup page which allows the pilot to select which page the GTN Xi starts on after acknowledging the instrument test page
- Added support to sync databases with GPS 175, GNX 375, or GNC 355
- Added config option to disable visual approaches
- Added config option to adjust COM headphone volume
- Added new user fields for time with seconds, distance and bearing from a selected waypoint, current position displayed in lat/lon format based on position units, and Flight ID
- ILS/GPS approach annunciate logic has been updated to help address issues with older autopilots while transitioning to approach mode during turns
- Fixed a problem with Flight data logs being merged into one larger file
- Added shortcut to view Charts from airports and procedures on the flight plan page
- Added an auto scroll to the active leg after 10 seconds of inactivity on the flight plan page
- Added controls for inhibiting terrain alerts to the terrain pop-ups
- Fixed the SMS text message send button issue described in Garmin Service Advisory 2077
- GTN Xi COM Software Version 2.02
- Robustness improvements
- GTN 6XX/7XX Main Software Version 6.71
- Added support to sync databases with GPS 175, GNX 375, or GNC 355
- Fixed a problem with Flight data logs being merged into one larger file
- ILS/GPS approach annunciate logic has been updated to help address issues with older autopilots while transitioning to approach mode during turns